The Unico System® - The Unico System® WON1002-C Electric Furnace, 34120 Btu/hr BTU, 240 V, 40 A, 10 kW, 1 ph Phase, 60 Hz
- Item #: WON1002-C
- Manufacturer: WON1002-C selecatableMap $selecatableMap.size() \\ selectableItemList $selectableItemList.size()
- Brand Name: The Unico System®
- Min. Order Qty: 1
- Qty. Interval: 1
The electric furnace module can be attached directly to one of our blower units or it can be installed in the supply air duct downstream from the blower unit as a duct heater.
The Unico System® Electric Furnace, 240 V, 40 A, 10 kW, 60 Hz, 1 ph, 34120 Btu/hr, 500 cfm, 17 VA Transformer, Steel, Galvanized, 16 in L x 20 in W x 29 in H
Instruction/Installation Manual- This model is rated for 10kw at 240 volts single phase
- The heater contains 2 circuit breakers as disconnects and one 15 amp breaker to power the blower unit
- There are multiple safety's built in such as a pressure air proving switch, fan relay switch, auto temperature limit and fuse links
- The heater comes with a 10" round start collar and a 11.5" square start collar
- NEW (Revision C) - more efficient DC contactors
- NEW (Revision C) - full disconnection when off
- Galvanized insulated sheet metal cabinet enclosure
- Can be converted to a duct heater
- Magnetic de-energizing contactors for each element
- Line level auto limit primary safety set at 165 deg F (74 deg C)
- Line level fuse link back-up safety
- Fan interlock control, fan signal proving switch
- Low air flow pressure switch
- Circuit breakers on all units
- Time delay sequencers for a gradual "stepped" power draw (softer start)
- Low voltage terminal strip (24 volt control)
- Specially designed tight cabinet for small duct, high velocity systems
- Single Supply (all units) or dual supply (15 and 20kW)
- 10" supply adapter