The Unico System® - The Unico System® WON Series WON0502-C Electric Furnace, 17060 Btu/hr BTU, 230 VAC, 15 A, 5 kW, 1 ph-Phase, 60 Hz
- Item #: WON0502-C
- Manufacturer: WON0502-C selecatableMap $selecatableMap.size() \\ selectableItemList $selectableItemList.size()
- Brand Name: The Unico System®
- Min. Order Qty: 1
- Qty. Interval: 1
The electric furnace module can be attached directly to one of our blower units or it can be installed in the supply air duct downstream from the blower unit as a duct heater. This model is rated for 5 kW at 240 V single phase. The heater contains 1 circuit breaker as a disconnect and one 15 A breaker to power the blower unit. There are multiple safety's built-in such as a pressure air proving switch, fan relay switch, auto-temperature limit and fuse links. The heater comes with a 10 in round start collar and a 11-1/2 in square start collar.
The Unico System® Electric Furnace, Series: WON Series, 230 VAC, 15 A, 5 kW, 60 Hz, 1 ph Phase, 17060 Btu/hr, 250 cfm Rating, Blower Motor, Sheet Metal, Galvanized, 165 deg F, 13 in L x 16 in W x 12 in H
Instruction/Installation Manual
Video Link- Can be used as either primary or auxiliary heating
- Galvanized insulated sheet metal cabinet enclosure
- Line level auto limit primary safety set at 165 deg F
- Line level fuse link back-up safety
- Fan interlock control
- Low air flow pressure switch
- Circuit breakers on all units
- Time delay sequencers for a gradual stepped power draw, allowing for a softer start
- Low voltage 24 V terminal strip
- Specially designed for use with SDHV