Samsung HSP (High Static) Ducted Unit, Series: DVM S, 340000 Btu/hr Heating 30000 Btu/hr Cooling, 208 to 230 V 60 Hz 1 Ph, 47-1/4 W x14-3/16 H x25-9/16 D
- Compatible with Samsung DVM S, DVM S Water, and DVM Eco systems (AM*********/AA).
- The indoor unit shall have an internal condensate pump as standard with float switch (maximum 29" lift from bottom of unit).
- High-voltage terminal block temperature sensor to disable unit in the event overheating of power connection.
- Discharge air temperature sensor with target discharge temperature control capability
- Construction: The unit shall be constructed of insulated, galvanized steel
- Heat Exchanger: The heat exchanger shall be mechanically bonded fin to copper tube
- Indoor Fan: Indoor fan is a centrifugal type with a single fan motor. Three fan speed settings and auto setting. Fan output can be configured during commissioning for various external static pressure ranges.
- Controls: The unit shall be operated via a wireless or wired remote control with DDC type signal. The unit shall integrate with the Samsung NASA Controls Network Solution. Controls shall integrate with a BMS system. Control wiring shall be 2 X 16 AWG shielded wire.
- Air Filtration: The unit shall ship with basic filtration as standard. Pressure drop across the filter must be factored into the total ESP.
Standard/Approvals: cETLus Listed
Application: Residential