Samsung - Samsung AJ018DNZDCG/AA Multi-Position Air Handler, 18000 Btu/hr BTU, 495 to 600 cfm, 208-230 V, 1.5 A, 5.28 kW, 60 Hz
- Item #: AJ018DNZDCG
- Manufacturer: AJ018DNZDCG/AA selecatableMap $selecatableMap.size() \\ selectableItemList $selectableItemList.size()
- Brand Name: Samsung
- Min. Order Qty: 1
- Qty. Interval: 1
Samsung Multi-Position Air Handler, 1.49 ton Nominal Capacity, 18000 Btu/hr Cooling Capacity, 20000 Btu/hr Heating, 18000 Btu/hr, 208-230 V, 1.5 A, 5.28 kW Wattage, 60 Hz, 1 ph, 495 to 600 cfm, Flared Connection, R-32 Refrigerant, 40 dBA Sound Level, 3/4 in Connection, 1/4 in Liquid Line, 1/2 in Suction Line, 3 Speed, Constant Torque Motor, 0.58 in-WC, Steel, Galvanized, 64 to 90 deg F Cooling, <=86 deg F Heating, 43 in H x 17-1/2 in W x 21 in D, For Use With Multi-Zone Systems
Instruction/Installation Manual- The system shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app
- The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire (when accessory electric heat kits are not installed)
- Insulated, galvanized steel
- The heat exchanger shall be mechanically bonded aluminum fin to copper tube
- Refrigerant flow shall be controlled by electronic an expansion valve at the outdoor unit
- The system shall include an R32 alarm output plug on the indoor unit and outdoor unit for notification of R32 leak detection (MIM-B14U accessory is required)
- Three fan speeds and auto setting
- Control wiring shall be 2 X 16 AWG wire
- The unit shall be operated via a wireless or wired remote control with DDC type signal
- Dual set temperature support when connected to supported controllers
- Wired or wireless controllers must be purchased separately
- External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat (MIM-B14U accessory required when controlling heating devices other than VHK-***C electric heat kits)
- External heat control configuration settings include outside ambient external heat lockout, outside ambient compressor lockout, and time delay options (MIM-B14U accessory required when controlling heating devices other than VHK-***C electric heat kits)
- Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating (MIM-B14U accessory required when controlling heating devices other than VHK-***C electric heat kits)
- External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat
- Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating
- Emergency Temperature Output (ETO) function: when indoor unit is in error status or when room temperature exceeds configurable temperature level, the system outputs a signal to an external source, e.g., backup system, building management system, alert device (ex: status light, warning lamp, buzzer)