Samsung - Samsung AC012DNHDCG/AA Ducted Single Zone Mini-Split Indoor Unit, 208-230 V, 6.6 A Cooling, 9.8 A Heating, 1 ph, Steel
- Item #: AC012DNHDCG
- Manufacturer: AC012DNHDCG/AA selecatableMap $selecatableMap.size() \\ selectableItemList $selectableItemList.size()
- Brand Name: Samsung
- Min. Order Qty: 1
- Qty. Interval: 1
Samsung Ducted Single Zone Mini-Split Indoor Unit, 208-230 V, 6.6 A Cooling, 9.8 A Heating, 3.5 kW, 60 Hz, 1 ph, 12000 Btu/hr Cooling, 14000 Btu/hr Heating, 318 to 516 cfm, 11.7 EER Rating, 18.6 SEER, 9.5 HSPF, Flared Connection, Twin Rotary Compressor, R-32 Refrigerant, 15 A Fuse Rating, Inverter Drive, Tonnage: 1 ton, 42 dBA Sound Level, Steel, Galvanized, 64 to 90 deg F Cooling, <=86 deg F Heating, 33-7/16 in Overall Length, 27-9/16 in Overall Width, 9-13/16 in Overall Height, Brushless DC Motor, 1/4 in Liquid Line, 3/8 in Suction Line
- Sound Level 42 dBA
- Tonnage 1 ton
- Voltage Rating 208-230 V
Catalog- The system shall provide high heating capacity at -4 deg F (-20 deg C) with heating operation down to -13 deg F (-25 deg C)
- The indoor unit shall have an integral condensate pump with maximum 29" lift from bottom of the unit with check valve and float switch that disables indoor in the event of condensate overflow
- The system shall feature comfort humidity control. Utilizing an integral humidity sensor, the system optimizes the indoor unit coil temperature according to the dew point, maximizing energy savings while still providing space dehumidification and occupant comfort
- The system shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app
- Auto-restart after power loss
- Soft-start compressor minimizing current inrush
- Indoor unit: Insulated, galvanized steel
- All heat exchangers shall be mechanically bonded aluminum fin to copper tube
- The system shall utilize low-GWP R-32 refrigerant
- Refrigerant flow shall be controlled by electronic an expansion valve at the outdoor unit
- The system shall include an R32 alarm output plug on the indoor unit and outdoor unit for notification of R32 leak detection when the optional refrigerant leak detector is installed and configured (leak detector and MIM-B14U accessories are required)
- Smart pressure control feature that adjusts fan speed based on ESP delivering consistent heating and cooling power
- The indoor unit shall have a smart-tuning function that can provide optimized comfort by allowing the occupant to offset the fan CFM curve to increase or decrease airflow
- The indoor unit shall have automatic air volume scanning for simple setup and optimized comfort settings for the occupant
- Control wiring shall be 2 X 16 AWG wire
- No additional interface modules/adapters are required when connecting to Samsung central control options
- The unit shall be operated via a wireless or wired remote control with DDC type signal
- Dual set temperature support when connected to supported controllers
- Wired or wireless controllers must be purchased separately
- External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat (MIM-B14U accessory required)