Insulation hangers are 12 ga steel insulation pins that are permanently staked through 2 x 2 in galvanized steel base plates. A pressure sensitive adhesive backing provides a permanent bond between the insulation hanger and ductwork. Each case includes self locking companion clips. Insulation Hangers also have 2 clearance holes in the baseplate that allow further reinforcement with a #8 self-tapping screw when needed. They can be used to hold all low and medium density insulation and insulation board where the temperature will not exceed 150 deg F.
CARLISLE® Insulation Hanger, 2 x 2 in, 3/4 in Length, 12 ga Height, 12 ga Gauge, Steel, Hot Dipped Galvanized
Specification Sheet- Reinforced baseplate
- Low carbon steel 12 ga pin allows easier bending of pin
- Paper backing easy to remove
- Includes self-locking companion clips
- Clearance holes allow adding #8 self-tapping screw for additional support
- Sharp diamond point to easily pierce through most insulation substrates